A 3D Stereoscopic UV Printing Process That Makes Packaging Hot

 

A 3D Stereoscopic UV Printing Process That Makes Packaging hot

 

Can 3D stereoscopic UV printing special effects lead a new era of post-press craftsmanship? Sonpha Printing will give you an analysis of the charm of this new craft.

 

1. Glossiness

 

Printing must not only have exquisite design, but also convey information about the product to consumers. Improving glossiness is one of the ways to improve the quality of printing. The polyester material used in 3D stereoscopic UV printing special effects is colorless and transparent like crystal water droplets. It can reach 99 GU glossiness during usage. Because of the high value of glossiness as a prerequisite, it also guarantees the brightness of the printed product.

 

2. Height

 

The thickness of the partially transparent polyester layer of 3D stereoscopic UV printing can reach 0.25cm. There is a certain height distance from the surface of the polyester to the bottom layer of the polyester, and this height distance is the stereoscopic space formed by the curing of the UV polyester. Due to the clear existence of height, on the one hand, the UV polyester has the conditions for see-through, and the sight of the audience will pass through naturally. On the other hand, the colorless and transparent characteristics of UV polyester make the visual space have good extensibility. There will be no faults in the level of visual perspective, and the audience's sight will not be stuck in a certain position, resulting in unsmooth look and feel experience.

 

3. Transparency of light

 

Generally speaking, the transparency of light refers to whether the directivity of light is strong, but actually refers to the clear directivity of light. The cured 3D UV printed polyester can reach the same distance point without obstacles, and the light transmission is very clear.

 

4. Use of color design

 

This mainly refers to the clarity of hue during design. But please note that the clarity of hue does not mean to use pure colors as much as possible. It is necessary to consider the reasonable changes of the same inherent color under different light intensities and different ambient light colors to create a clear inherent hue. The color of traditional domestic UV varnish is generally yellowish, so in the production of the original design draft, the use of yellow needs to be reduced or adjusted to avoid color deviation on the output. 3D stereoscopic UV printing polyester is a colorless and fully transparent material, covering the printed product will not affect the color change, but it should be noted that the use of 3D stereoscopic UV to make prints, whether the color design of the printed product is appropriate, and whether the use of materials is reasonable will also have a certain impact on the "transparency" of the perception.

 

Nowadays, most of the printed products on the market are beautiful, with surface effects such as  stereoscopic, frosted, golden glitter, etc., which are dazzling. The printing industry has developed and evolved over the years, such as embossing, grating, hot stamping, etc. The emergence of craftsmanship has led the printing industry to an era of rapid development. The birth of 3D  stereoscopic UV printing special effects has injected new blood into the post-printing process, hoping to bring a wonderful future to printers.

 

Shenzhen Sonpha Paper Co., Ltd. has more than 10 years of industry experience in printing production, and specializes in providing packaging color boxes, braille, 3D partial UV hot stamping and other printing production services. No need for UV hot stamping plate, and UV stereoscopic height can reach 0.25mm. Short production period, and it only takes 1 hour to produce UV hot stamping samples.

 

Follow Sonpha Paper Co., Ltd., and we will continue to introduce you more information about printing.

2020/11/09 13:43
Browsing amount:0
Collection
HOME    A 3D Stereoscopic UV Printing Process That Makes Packaging Hot